Effects of Plant Density and Planting Pattern on Growth and Seed Yield of Groundnuts [Arachis hypogaea (l.)] in the Wet Middleveld of Eswatini

The most appropriate plant density and planting pattern to use for optimum growth and yield of groundnuts (Arachis hypogaea L.) in Eswatini among those currently used is not known, as the patterns are highly influenced by environmental conditions in specific regions. A field trial was conducted with the objective of determining the optimum plant density and planting pattern for groundnut in the Wet Middleveld of Eswatini. The experiment was conducted at the University of Eswatini, Luyengo Campus during the 2018/2019 cropping. The treatments consisted of three planting densities (i.e. 88,889 plants/ha, 44,444 plants/ha, and 29,630 plants/ha) and two planting patterns (i.e. Ridges and Raisedbeds) in a split plot arrangement. Results showed that all the measured parameters including seed yield were not significantly different in all treatments. However, the highest seed yield was obtained at low plant density which was 71.4 kg/ha followed by 568 kg/ha at medium and the least was 434 kg/ha at high plant density. The high plant density (88889 plants/ha) obtained the highest value of dry biomass (13018 kg/ha) at ridges which was higher than 3859 kg/ha obtained at the low plant density (29630 plants/ha) at raised beds at R6 growth stage. The ridges at the intermediate plant density (44444 plants per hectare) obtained the highest shelling percentage of 59.67% while the lowest (56%) shelling percentage was obtained at raised beds at 88889 plants per hectare. It is concluded that groundnuts at raised beds with low plant density yielded higher than those at ridges with high plant density. It is therefore, recommended that groundnuts be planted at raised beds with low plant density to increase groundnut production and for ease of harvesting.